Masonry Paints
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, swimming pools, bird baths, fish ponds, and foundations. Stops water under pressure up to 10 P.S.I. per sq. in. That's greater than a column of water 22' high. Chalky (efflorescence) deposits must be removed by etching the surface. Alkali-resistant and may be applied on slightly damp surfaces below ground, but best results are obtained on dry surfaces. Low odor formulation is VOC/VOS compliant and cleans up with soap and water. Applies easily with brush or roller. Covers approximately 75 to 125 sq. ft. per gallon. Latex based Drylok is backed by a 10 year manufacturer warranty.
Just like natural and man-made stone, concrete and masonry are porous materials. They will start to break down, dust, pit, crack, and/or stain easily when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect surfaces with a good quality sealer. Latex base DRYLOK Concrete Protector provides clear, weatherproof protection against deterioration caused by de-icing salts, household cleaners, acid, gasoline, oil, and weathering. Formulated with our exclusive SALTLOK Technology, it penetrates into the surface and provides superior resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block, and poured concrete surfaces. Protect interior, exterior, vertical, and horizontal masonry surfaces like stucco, brick and concrete. Prevents excessivedusting, surface cracking and pock marking. Use on bare masonry or previously painted surfaces. Application tools: brush, roller, spray, squeegee, pad applicator. Dry time: 1 hour. Recoat time: 6 hours. Coats: 1-2.
QT SAT BLOS WHT PAINT
A new generation of water borne, acrylic emulsion self-priming pool paint which can be applied over most types of pool coatings in good sound condition, as well as bare concrete (cured 60 days) or plaster surfaces. Environmentally friendly, low VOC. Model No. WR-1000 series pool paint can be applied to damp surfaces, dries quickly for recoating, and withstands continuous submersion in fresh and salt water. Resists mildew, algae, fresh and salt water, and sun tan oils. Refer to Insl-X swimming pool paint brochure for complete instructions regarding application. Suggested uses: Interior, exterior, fresh or salf water concrete pools, baby pools, etc. Allow paint to dry for a minimum of 5 days after final coat before filling outdoor pool. If it is an indoor pool, allow 10 days drying time in well circulated air before filling pool.1 gallon covers approximately 250 - 300 sq. ft. Semi-gloss finish. Water-based pool paint may be tinted with up to 2 oz. of universal colorants.
Insl-X RP Series pool paint is a rubber base coating for all new or old concrete pools. This product complies with all volatile emission standards outlined by the Ozone Transport Commission (less than 340gm/ltr). Insl-X RP Series pool paint provides a durable satin finish for use in residential and commercial pools. Suitable for use in fresh or salt water. Resists fading, fungus, algae, abrasion, and alkalis. Refer to Insl-X swimming pool paint brochure for complete instructions regarding application. Covers approximately 450 sq. ft. per gallon. Sets to touch in 30 minutes, recoat in 24 hours. Fill pool after 7 days for outdoor pools or 14 days for indoor pools. Slowly add diluted pool chemicals for first treatment. Suggested uses: Concrete, Gunnite*, Marcite*, pools. * = Integrity of Marcite or Gunnite must be sound and solid. Do Not use on metal, fiberglass, vinyl lined pools, hot tubs, nor spas.
Insl-X RP Series pool paint is a rubber base coating for all new or old concrete pools. This product complies with all volatile emission standards outlined by the Ozone Transport Commission (less than 340gm/ltr). Insl-X RP Series pool paint provides a durable satin finish for use in residential and commercial pools. Suitable for use in fresh or salt water. Resists fading, fungus, algae, abrasion, and alkalis. Refer to Insl-X swimming pool paint brochure for complete instructions regarding application. Covers approximately 450 sq. ft. per gallon. Sets to touch in 30 minutes, recoat in 24 hours. Fill pool after 7 days for outdoor pools or 14 days for indoor pools. Slowly add diluted pool chemicals for first treatment. Suggested uses: Concrete, Gunnite*, Marcite*, pools. * = Integrity of Marcite or Gunnite must be sound and solid. Do Not use on metal, fiberglass, vinyl lined pools, hot tubs, nor spas.